Satin-finish wood coating
DECORATIVE WOOD IMPREGNATING AGENT
It adds style while maintaining the natural matt finish of the wood
IT GIVES THE WOOD A NOBLE LOOK that greatly enhances aesthetic qualities of wooden products
IT PRESERVES THE VISIBLE STRUCTURE OF THE WOOD, emphasising its natural qualities
IT GIVES THE WOOD A MATT EFFECT, bringing out even more of its natural charm
IT PENETRATES DEEP INTO THE WOOD, reinforcing its structure
IT CREATES A DURABLE COATING, ensuring that the results obtained are unchanged over the years
IT INCREASES PROTECTION AGAINST BIOCOROSION by protecting the wood against weather conditions
COATING ON THE WOOD IS DURABLE, protected against fungi and moulds
EXCELLENT FOR USE BOTH INDOORS AND OUTDOORS
For orders of more than 200 litres, we will prepare an OVERVIEW in a colour individually agreed with the customer.
POLYMER DISPERSIONS – a membrane-forming process
HYDROPHOBIC AGENTS – they prevent the penetration of moisture into the wood
PRESERVATIVES – they provide durability in conditions conducive to biocorrosion
PIGMENTS – they determine the final look of the varnished wood
liquid of a colour appropriate to the product range
It can be mixed well with water
Store in tightly closed containers at 5-35 °C, protect from sunlight and high temperatures.
1,05 ± 0,1 g/cm3
2 years from date of manufacture
MAINTAINING COLOUR UNIFORMITY
The product should come from the same production batch, different batches should be poured into one container beforehand and mixed thoroughly.
TYPE OF WOOD
The product is not recommended for impregnating very hard woods, such as oak.
POWER OF COLOUR
The colour you get on the surface of the wood depends on the species of wood, the type of treatment and the number of coats of product applied.
10 l canister, 200 l drum, 1000 l tank
contents of the pallet
44 packs of 10 l / 2 drums of 200 l
The wood must be cleaned, dry (with a moisture content of up to 25%), smoothed, without residues of previous coatings. Infected surfaces should be cleaned down to untreated wood or replaced with new wood. When impregnating untreated wood and parts exposed to harmful atmospheric conditions, pre-impregnation with agents such as DEKOLIT PRO, DEKOLIT B, DEKOLIT KD EXTRA, DEKOLIT KD is recommended.
Use commercial product. Immediately before use, the formulation should be thoroughly mixed to the proper consistency.
Apply the product with a brush or tampon. It is recommended to apply at least two coats at intervals allowing the previous coat to dry.
1 litre of LASURE is sufficient for one coat of approx. 20 m2 of wood (differences may occur depending on the species, hardness and smoothness of the wood surface).
LASURE dries in approx. 2 hours at 20 °C.
Wash tools with water.
When giving a new, noble colour to wood, we want to fully preserve its natural structure and matt character at the same time, we need to look for a special product. LASURE has been created to fulfil such expectations. With it we can give the wood a new colour and be certain that the wood will remain beautifully matt.
Tiles and grout
Stored sawn timber
Platforms for scaffolding
Walls and ceilings