Other products
Tiles and grout
Wooden houses
Furniture
Pergolas
Flooring
Slatted fences
Terraces
Playgrounds
Woodsheds
Garden furniture
Fences
Platforms
Stored sawn timber
Gazebos
Stored logs
Bridges
Gates
Soffit boards
Acoustic screens
Facades
Planks
Shutters
Rafter framing
Windows
Wooden structures
Doors
Platforms for scaffolding
Walls and ceilings
Walls
Balustrades
Elegant gloss of wood varnish
Clear
Golden oak
Teak
Pine
Rosewood
Walnut
Mahogany
Chestnut
White
Note: For orders exceeding 200 litres, we will prepare the EXTRA LASURE in a colour individually agreed with the customer.
For wood used outdoors, use EXTRA LASURE clear only as a third coat after applying the colour coats first.
polymer dispersions, hydrophobic agents, preservatives, pigments, water
7,5–9
liquid of a colour appropriate to the product range
1,04 g/cm3
It can be mixed well with water
viscosity cup flow time Φ 6 mm: 30-50 s
Store in tightly closed containers at 5-35 °C, protect from sunlight and high temperatures.
2 years from date of manufacture
MAINTAINING COLOUR UNIFORMITY The product should come from the same production batch, different batches should be poured into one container beforehand and thoroughly mixed.
AMBIENT TEMPERATURE Work should be carried out at temperatures above 5 °C.
POWER OF COLOUR The colour you get on the surface of the wood depends on the species of wood, the type of treatment and the number of coats of product applied.
TRANSPORT PROTECTION Transport in an upright position with the lid up, secure the packaging to prevent it from tipping over.
AVAILABLE PACKAGING 10 l canister, 200 l drum, 1000 l tank
PALLET CONTENT 44 packs of 10 l / 2 drums of 200 l
POLYMER DISPERSIONS – a membrane-forming process
HYDROPHOBIC AGENTS – they prevent the penetration of moisture into the wood
PRESERVATIVES – they provide durability in conditions conducive to biocorrosion
PIGMENTS – they determine the final look of the varnished wood
POLYMER DISPERSIONS – a membrane-forming process
SURFACE PREPARATION
In the case of new and untreated wood – clean and smooth the surface. In other cases, remove old coatings and damaged sections of wood. If necessary, degrease, sand and remove dust and dirt. Apply to air-dry wood.
PRODUCT PREPARATION
Use commercial product. Immediately before use, the product should be thoroughly mixed to the proper consistency.
METHOD OF APPLICATION
Apply with a brush on the wood surface. It is recommended to apply two coats of the product. Apply another coat on the dried surface (after 6-12 hours). Work at temperatures above 5 °C. Mix during the work in order to maintain homogeneous consistency.
COVERAGE
1 litre of EXTRA LASURE is sufficient for one coat of approx. 18-22 m2 of wood (differences may occur depending on the species, hardness and smoothness of the wood surface).
DRYING
EXTRA LASURE dries from 6 to 12 hours at 20 °C, depending on the relative humidity of the air.
TOOL WASHING
Wash tools with water.
Water-based acrylic varnishes are often referred to as safety varnishes. The solvent is not petrol or petrol derivatives, but water. These varnishes do not emit unpleasant odours after application. Acrylic coatings remain elastic on the surface of the wood and preserve its natural colour, providing excellent protection against UV rays. When you want to give facades, filters, beams, balustrades, shutters, doors, garden furniture a noble look and an elegant sheen, and at the same time you are looking for a water-based varnish, EXTRA LASURE is a good choice.
Tiles and grout
Wooden houses
Furniture
Pergolas
Flooring
Slatted fences
Terraces
Playgrounds
Woodsheds
Garden furniture
Fences
Platforms
Stored sawn timber
Gazebos
Stored logs
Bridges
Gates
Soffit boards
Acoustic screens
Facades
Planks
Shutters
Rafter framing
Windows
Wooden structures
Doors
Platforms for scaffolding
Walls and ceilings
Walls
Balustrades
Monday to Friday: 8:00-16:00
Website design
